How to install OpenERP 6.0 on Ubuntu 10.04 LTS Server (Part 1)

Update: 22/02/2012. OpenERP 6.1 was released today. I’ve written a howto for this new version here.

OpenERP LogoRecently at work, we’ve been setting up several new instances of OpenERP for customers. Our server operating system of choice is Ubuntu 10.04 LTS.

Installing OpenERP isn’t really that hard, but having seen several other “How Tos” on-line describing various methods where none seemed to do the whole thing in what I consider to be “the right way”, I thought I’d explain how we do it. There are a few forum posts that I’ve come across where the advice is just plain wrong too, so do be careful.

As we tend to host OpenERP on servers that are connected to the big wide Internet, our objective is to end up with a system that is:

      A: Accessible only via encrypted (SSL) services from the GTK client, Web browser, WebDAV and CalDAV
      B: Readily upgradeable and customisable

One of my friends said to me recently, “surely it’s just sudo apt-get install openerp-server isn’t it?” Fair enough; this would actually work. But there are several problems I have with using a packaged implementation in this instance:

  • Out-of-date. The latest packaged version I could see, in either the Ubuntu or Debian repositories, was 5.0.15. OpenERP is now at 6.0.3 and is a major upgrade from the 5.x series.
  • Lack of control. Being a business application, with many configuration choices, it can be harder to tweak your way when the packager determined that one particular way was the “true path”.
  • Upgrades and patches. Knowing how, where and why your OpenERP instance is installed the way it is, means you can decide when and how to update it and patch it, or add custom modifications.

So although the way I’m installing OpenERP below is manual, it gives us a much more fine-grained level of control. Without further ado then here is my way as it stands currently (“currently” because you can almost always improve things. HINT: suggestions for improvement gratefully accepted).

[Update 18/08/2011: I’ve updated this post for the new 6.0.3 release of OpenERP]

Step 1. Build your server

I install just the bare minimum from the install routine (you can install the openssh-server during the install procedure or install subsequently depending on your preference).

After the server has restarted for the first time I install the openssh-server package (so we can connect to it remotely) and denyhosts to add a degree of brute-force attack protection. There are other protection applications available: I’m not saying this one is the best, but it’s one that works and is easy to configure and manage. If you don’t already, it’s also worth looking at setting up key-based ssh access, rather than relying on passwords. This can also help to limit the potential of brute-force attacks. [NB: This isn’t a How To on securing your server…]

sudo apt-get install openssh-server denyhosts

Now make sure you are running all the latest patches by doing an update:

sudo apt-get update
sudo apt-get dist-upgrade

Although not always essential it’s probably a good idea to reboot your server now and make sure it all comes back up and you can still login via ssh.

Now we’re ready to start the OpenERP install.

Step 2. Create the OpenERP user that will own and run the application

sudo adduser --system --home=/opt/openerp --group openerp

This is a “system” user. It is there to own and run the application, it isn’t supposed to be a person type user with a login etc. In Ubuntu, a system user gets a UID below 1000, has no shell (well it’s actually /bin/false) and has logins disabled. Note that I’ve specified a “home” of /opt/openerp, this is where the OpenERP server, and optional web client, code will reside and is created automatically by the command above. The location of the server code is your choice of course, but be aware that some of the instructions and configuration files below may need to be altered if you decide to install to a different location.

Step 3. Install and configure the database server, PostgreSQL

sudo apt-get install postgresql

Then configure the OpenERP user on postgres:

First change to the postgres user so we have the necessary privileges to configure the database.

sudo su - postgres

Now create a new database user. This is so OpenERP has access rights to connect to PostgreSQL and to create and drop databases. Remember what your choice of password is here; you will need it later on:


createuser --createdb --username postgres --no-createrole --no-superuser --pwprompt openerp
Enter password for new role: ********
Enter it again: ********

[Update 18/08/2011: I have added the --no-superuser switch. There is no need for the openerp database user to have superuser privileges.]

Finally exit from the postgres user account:

exit

Step 4. Install the necessary Python libraries for the server


sudo apt-get install python python-psycopg2 python-reportlab \
python-egenix-mxdatetime python-tz python-pychart python-mako \
python-pydot python-lxml python-vobject python-yaml python-dateutil \
python-pychart python-webdav

And if you plan to use the Web client install the following:


sudo apt-get install python-cherrypy3 python-formencode python-pybabel \
python-simplejson python-pyparsing

Step 5. Install the OpenERP server, and optional web client, code

I tend to use wget for this sort of thing and I download the files to my home directory.

Make sure you get the latest version of the application files. At the time of writing this it’s 6.0.2 6.0.3; I got the download links from their download page.


wget http://www.openerp.com/download/stable/source/openerp-server-6.0.3.tar.gz

And if you want the web client:


wget http://www.openerp.com/download/stable/source/openerp-web-6.0.3.tar.gz

Now install the code where we need it: cd to the /opt/openerp/ directory and extract the tarball(s) there.


cd /opt/openerp
sudo tar xvf ~/openerp-server-6.0.3.tar.gz
sudo tar xvf ~/openerp-web-6.0.3.tar.gz

Next we need to change the ownership of all the the files to the openerp user and group.


sudo chown -R openerp: *

And finally, the way I have done this is to copy the server and web client directories to something with a simpler name so that the configuration files and boot scripts don’t need constant editing (I call them, rather unimaginatively, server and web). I started out using a symlink solution, but I found that when it comes to upgrading, it seems to make more sense to me to just keep a copy of the files in place and then overwrite them with the new code. This way you keep any custom or user-installed modules and reports etc. all in the right place.


sudo cp -a openerp-server-6.0.3 server
sudo cp -a openerp-web-6.0.3 web

As an example, should OpenERP 6.0.4 come out next, I can extract the tarballs into /opt/openerp/ as above. I can do any testing I need, then repeat the copy command (replacing 6.0.3 obviously) so that the modified files will overwrite as needed and any custom modules, report templates and such will be retained. Once satisfied the upgrade is stable, the older 6.0.3 directories can be removed if wanted.

That’s the OpenERP server and web client software installed. The last steps to a working system are to set up the two (server and web client) configuration files and associated init scripts so it all starts and stops automatically when the server boots and shuts down.

Step 6. Configuring the OpenERP application

The default configuration file for the server (in /opt/openerp/server/doc/) could really do with laying out a little better and a few more comments in my opinion. I’ve started to tidy up this config file a bit and here is a link to the one I’m using at the moment (with the obvious bits changed). You need to copy or paste the contents of this file into /etc/ and call the file openerp-server.conf. Then you should secure it by changing ownership and access as follows:


sudo chown openerp:root /etc/openerp-server.conf
sudo chmod 640 /etc/openerp-server.conf

The above commands make the file owned and writeable only by the openerp user and only readable by openerp and root.

To allow the OpenERP server to run initially, you should only need to change one line in this file. Toward to the top of the file change the line db_password = ******** to have the same password you used way back in step 3. Use your favourite text editor here. I tend to use nano, e.g. sudo nano /etc/openerp-server.conf

Once the config file is edited, you can start the server if you like just to check if it actually runs.

/opt/openerp/server/bin/openerp-server.py --config=/etc/openerp-server.conf

It won’t really work just yet as it isn’t running as the openerp user. It’s running as your normal user so it won’t be able to talk to the PostgreSQL database. Just type CTL+C to stop the server.

Step 7. Installing the boot script

For the final step we need to install a script which will be used to start-up and shut down the server automatically and also run the application as the correct user. Here’s a link to the one I’m using currently.

Similar to the config file, you need to either copy it or paste the contents of this script to a file in /etc/init.d/ and call it openerp-server. Once it is in the right place you will need to make it executable and owned by root:


sudo chmod 755 /etc/init.d/openerp-server
sudo chown root: /etc/init.d/openerp-server

In the config file there’s an entry for the server’s log file. We need to create that directory first so that the server has somewhere to log to and also we must make it writeable by the openerp user:


sudo mkdir /var/log/openerp
sudo chown openerp:root /var/log/openerp

Step 8. Testing the server

To start the OpenERP server type:

sudo /etc/init.d/openerp-server start

You should now be able to view the logfile and see that the server has started.

less /var/log/openerp/openerp-server.log

If there are any problems starting the server now you need to go back and check. There’s really no point ploughing on if the server doesn’t start…

OpenERP - First Login

OpenERP - First Login

If you now start up the GTK client and point it at your new server you should see a message like this:

Which is a good thing. It means the server is accepting connections and you do not have a database configured yet. I will leave configuring and setting up OpenERP as an exercise for the reader. This is a how to for installing the server. Not a how to on using and configuring OpenERP itself…

What I do recommend you do at this point is to change the super admin password to something nice and strong. By default it is “admin” and with that a user can create, backup, restore and drop databases (in the GTK client, go to the file menu and choose the Databases -> Administrator Password option to change it). This password is written as plain text into the /etc/openerp-server.conf file. Hence why we restricted access to just openerp and root.

One rather strange thing I’ve just realised is that when you change the super admin password and save it, OpenERP completely re-writes the config file. It removes all comments and scatters the configuration entries randomly throughout the file. I’m not sure as of now if this is by design or not.

Now it’s time to make sure the server stops properly too:

sudo /etc/init.d/openerp-server stop

Check the logfile again to make sure it has stopped and/or look at your server’s process list.

Step 9. Automating OpenERP startup and shutdown

If everything above seems to be working OK, the final step is make the script start and stop automatically with the Ubuntu Server. To do this type:

sudo update-rc.d openerp-server defaults

You can now try rebooting you server if you like. OpenERP should be running by the time you log back in.

If you type ps aux | grep openerp you should see a line similar to this:

openerp 708 3.8 5.8 181716 29668 ? Sl 21:05 0:00 python /opt/openerp/server/bin/openerp-server.py -c /etc/openerp-server.conf

Which shows that the server is running. And of course you can check the logfile or use the GTK client too.

Step 10. Configure and automate the Web Client

Although it’s called the web client, it’s really another server-type application which [ahem] serves OpenERP to users via a web browser instead of the GTK desktop client.

If you want to use the web client too, it’s basically just a repeat of steps 6, 7, 8 and 9.

The default configuration file for the web client (can also be found in /opt/openerp/web/doc/openerp-web.cfg) is laid out more nicely than the server one and should work as is when both the server and web client are installed on the same machine as we are doing here. I have changed one line to turn on error logging and point the file at our /var/log/openerp/ directory. For our installation, the file should reside in /etc/, be called openerp-web.conf and have it’s owner and access rights set as with the server configuration file:


sudo chown openerp:root /etc/openerp-web.conf
sudo chmod 640 /etc/openerp-web.conf

Here is a web client boot script. This needs to go into /etc/init.d/, be called openerp-web and be owned by root and executable.


sudo chmod 755 /etc/init.d/openerp-web
sudo chown root: /etc/init.d/openerp-web

You should now be able to start the web server by entering the following command:

sudo /etc/init.d/openerp-web start

Check the web client is running by looking in the log file, looking at the process log and, of course, connecting to your OpenERP server with a web browser. The web client by default runs on port 8080 so the URL to use is something like this: http://my-ip-or-domain:8080

Make sure the web client stops properly:

sudo /etc/init.d/openerp-web stop

And then configure it to start and stop automatically.

sudo update-rc.d openerp-web defaults

You should now be able to reboot your server and have the OpenERP server and web client start and stop automatically.

I think that will do for this post. It’s long enough as it is!

I’ll do a part 2 in a little while where I’ll cover using apache, ssl and mod_proxy to provide encrypted access to all services.

[UPDATE: Part 2 is here]

April 19th, 2011 | Alan Lord | Tags: , , , , , , , , , .
Categories: OpenERP, The Open Learning Centre, Ubuntu | Comments: 183 Comments

I’ve started so I’ll finish

Saturday night 9PM is quiz night this week for the Ubuntu-UK LoCo! We have some swag to give away and are going to send this out to some lucky (and perhaps knowledgeable) winners of a quiz. The quiz will be conducted online with questions and answers over IRC in the #ubuntu-trivia channel. Get a headset and install mumble from the software center as we also have audio, then connect to mumble.libertus.co.uk. If you get stuck ask for help in the #ubuntu-uk channel.

The questions will be a brand new set on the topic of Ubuntu and may include some, all, or none, from this week’s guest publication, the official Ubuntu Book 5th edition (which is also one of the prizes).

If you are not UK based you are more than welcome to observe, and join the audio on the Mumble server, but prizes are only going to be sent to UK addresses. The questions will remain available in #ubuntu-trivia for anyone to use after Saturday.

You are the weakest link, goodbye.

April 13th, 2011 | Alan Bell | Categories: Ubuntu | Comments: No Comments

Jamming in the UK

This weekend was the Ubuntu Global Jam, a kind of focused but unstructured effort to get stuff done on the Ubuntu project. In the UK we held a virtual day of workshops with IRC chat and a voice over IP server running Mumble (hosted by our company)

We started by doing a tidyup of the UK team wiki pages, we made a big list of all the pages on our etherpad server http://pad.ubuntu-uk.org/ListOfUKTeamPages and went through one by one reviewing them and updating or deleting out of date stuff.

Next on the list was an install of the latest version of Ubuntu in development, after a bit of messing about I got a KVM virtual machine running a public VNC server and we installed Natty in that so loads of people could connect and watch screen by screen and we looked for bugs and oddness in the installer. We raised a few and bumped in to a few that already had been reported.

After the run through of the regular installer we did an install using the accessibility option of a screen reader, so the idea is you go through the installer with an audio commentary and you should be able to do it with no screen, or no vision. This was not a huge success and we filed the following bugs:

If you happen to be doing a Natty install over the next few weeks, just have a go at pressing space after the bios, select your language then press F5 for the menu of accessible install options. Pick one at random and install as you would have done anyway, and file bugs if anything doesn’t work. You end up with the same system you would have ended up with anyway (except you might have the screen reader enabled by default but this is easy to remove) and it is an easy opportunity to do some valuable testing.

The final item we did was an update of the LoCo governance documents surrounding election processes to be proposed to the team for confirmation at the next online meeting.

April 3rd, 2011 | Alan Bell | Categories: Ubuntu | Comments: No Comments

Ubuntu-UK Virtual Jam

This Saturday from 10AM to whenever we get bored there will be an online global jam session for the Ubuntu UK community. You can think of it as a virtual barcamp, and just like other barcamps the agenda is open and available for you to fill out with what you want to do. The agenda is in fact here: http://pad.ubuntu-uk.org/globaljam2011 we can cover any subjects, but I would like to focus on actually doing things rather than talking about doing things. Ideas could include things like:

  • Propose a hack session on an application you are working on and need some help
  • Talk about Debian packaging and lets actually package something together
  • Run though some Natty installation testing together
  • Write some documentation together

The common theme is that this is a collaborative exercise in real time and to support that we will be using the #ubuntu-uk IRC channel that we use for general support and chat, plus we will also be using a voice over IP conferencing server that uses the Mumble client. This client is in Ubuntu so just find it in the software centre or “sudo apt-get install mumble” from a terminal. Once you have it installed and running you need to connect to the server at mumble.libertus.co.uk and then start talking away. Please use a headset microphone to avoid feedback or you will have to use the push to talk feature which is a bit unnatural. The server is up and running already, feel free to give it a try in advance.

I look forward to hearing lots of people on Saturday!

March 29th, 2011 | Alan Bell | Categories: The Open Learning Centre, Ubuntu | Comments: No Comments

BSA Supporting Free & Open Source Software

BSA SPAM

BSA SPAM

Recently I’ve been getting, what I initially and mistakenly assumed to be, spam in my inbox from the Business Software Alliance. An organisation that doesn’t immediately spring to mind when thinking about Freedom and choice in software.

This spam marketing literature however, is actually a very compelling call to action for those businesses that aren’t already protecting themselves by using Free and Open Source Software. If the image isn’t terribly legible, here are a few of the juicy bits just SCREAMING at you to think very carefully about the software choices you make in your business.

Your boss wouldn’t ask you to steal or commit fraud, would they? So why do they ask you to use unlicensed software?

Note the phrasing: “unlicensed software”. Of course Free software is licensed, so that’s OK then. There are lots of great Free Software licenses.

Here’s the bit where the BSA really start to suggest you should be using Free Software.

Here’s how easy it is to get caught up using illegal software:

  • One or more software licenses are bought, but the software is installed on more PCs than the licenses permit
  • Software is purchased for an employee’s home PC and is also installed on to a work PC

These activities are perfectly OK and in-fact encouraged with licensed Free software. A Free Software License gives a user the freedom to do these things; It’s called freedom 2: The freedom to redistribute copies so you can help your neighbor.

  • Font designs and software are downloaded illegally from the internet

You can download legally lots of font designs from places such as the Open Font Library and Google’s WebFont Library online.

The recently released Ubuntu font is an excellent example of a high quality, freely available font.. You can read about it here, get it from here and even get the font source from here. You may also choose to use the Google Font API to use it freely on your website from here.

And as for downloading “software” well, there’s probably more Free software available for download than the BSA could shake a stick at.

So please, consider carefully what our friends at the BSA have to say and talk your bosses or employees about the choices they make. Using properly licensed software is not hard. You don’t have to be at risk from even making a simple mistake. Using licensed Free software protects you.

If you are in a business and want advice on the choices available there are companies such as our own that can help. The BSA would rather your employees take you to the cleaners…

So, if you know of a company that is using unlicensed software, please let us know now. You could receive a reward of up to £10,000.

March 4th, 2011 | Alan Lord | Tags: , , , , .
Categories: FLOSS in the news, The Open Learning Centre, Ubuntu | Comments: 1 Comment

Edubuntu at BETT 2011

Just before my trip to Belgium I was asked to say a few words about the Edubuntu project at the BETT 2011 educational technology show as part of a larger presentation on Open Source software for education. It was quite encouraging to see the packed room of teachers and educational leaders all wanting to learn more about doing more for less with Free Software.

January 24th, 2011 | Alan Bell | Categories: FLOSS in the news, The Open Learning Centre, Ubuntu | Comments: 1 Comment

« Previous Page — Next Page »