How to install a Squid & Dansguardian content filter on Ubuntu Server

Being a family man and a geek, our household has both children and lots of tech; there are 6 or so computers, various tablets, smartphones and other devices capable of connecting to, and displaying content from, the Internet.

For a while now I’ve wanted to provide a degree of content filtering on our network to prevent accidental, or deliberate, access to some of the worst things the Internet has to offer. What I didn’t want to do however was blindly hand control of this very important job to my ISP (as our beloved leader would like us all to do). Also, I absolutely believe this is one of my responsibilities as a parent; it is not anyone else’s. In addition, there are several problems I have with our government’s chosen approach:

  • Filtering at the ISP network-side means the ISP must try and inspect all my internet traffic all of the time (what else could they potentially do with this information I wonder?)
  • If the ISP’s filter prevents access to content which we feel that our kids should be able access, how can I change that? Essentially I can’t.
  • I reckon that most kids of mid-teenage years will have worked out ways to bypass these filters anyway (see footnote) leaving more naive parents in blissful ignorance; thinking their kids are protected when in fact they are not.

With the above in mind I set about thinking how I could provide a degree of security on our home network using tried and trusted Open Source tools…

Firstly this is how our networked looked before.
Home network (before filtering)

The BT Router is providing the DHCP service in the above diagram.

The Ubuntu 12.04 Server is called vimes (after Commander Vimes in the Discworld novels by Terry Pratchett) and is still running the same hardware that I described way back in 2007! It’s a low power VIA C7 processor, 1G of RAM and it now has a couple of Terabytes of disk. It’s mainly used as a central backup controller and dlna media store/server for the house.

I never did get Untangle working on it, but now it seemed like a good device to use to do some filtering… There are loads of instructions on the Internet about using Squid & Dansguardian but none covered quite what I wanted to achieve: A dhcp serving, bridging, transparent proxy content filter.

Architecturally, my network needed to look like this:

Home network (after filtering)

As you can see above, the physical change is rather negligible. The Ubuntu server now sits between the home LAN and the broadband router rather than as just another network node on the LAN as it was before.

The configuration of the server to provide what I required can be broken down into several steps.

1. Get the Ubuntu server acting as a transparent bridge

This is relatively straightforward. First install the bridge-utils package: sudo apt-get install bridge-utils

Then I made a backup of my /etc/network/interfaces file and replaced it with this one:

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
  
# The loopback network interface
auto lo
iface lo inet loopback

# Set up interfaces
iface eth0 inet manual
iface eth1 inet manual

# Bridge setup
auto br0
iface br0 inet static
  bridge_ports eth0 eth1
  address 192.168.1.2
  broadcast 192.168.1.255
  netmask 255.255.255.0
  gateway 192.168.1.1

Probably the most interesting part of this file is where we assign a static IP address to the bridge itself. Without this I would not be able to connect to this server as both ethernet ports are now just transparent bridge ports so not actually listening for IP traffic at all.

(Obviously you will need to determine the correct IP address scheme for your own network)

2. Disable DHCP on the router and let Ubuntu do it instead

The reason for this is mostly down to the BT Home Hub… For some bizarre reason, BT determined that they should control what DNS servers you can use. Although I’m not using it right now, I might choose to use OpenDNS for example, but I can’t change the DNS addresses served by the BT Home Hub router so the only way I can control this is to turn off DHCP on the router altogether and do it myself.

Install the dhcp server: sudo apt-get install dhcp3-server

Tell the dhcp server to listen for requests on the bridge port we created before by editing the file /etc/default/isc-dchp-server so that the INTERFACES line reads: INTERFACES="br0".

Then edit the dhcp configuration file /etc/dhcp/dhcpd.conf so we allocate the IP addresses we want to our network devices. This is how mine looks:

ddns-update-style none;

default-lease-time 600;
max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;

subnet 192.168.1.0 netmask 255.255.255.0 {
        range 192.168.1.16 192.168.1.254;

        option subnet-mask 255.255.255.0;
        option routers 192.168.1.1;
        
        #Google DNS
        option domain-name-servers 8.8.8.8, 8.8.4.4;
        #OpenDNS
        #option domain-name-servers 208.67.222.222, 208.67.220.220;

        option broadcast-address 192.168.1.255;
}

There are many options and choices to make regarding setting up your DHCP server. It is extremely flexible; you will probably need to consult the man pages and other on-line resources to determine what is best for you. Mine is very simple. It serves one block of IP addresses within the range 192.168.1.16 to 192.168.1.254 to all devices. Currently I’m using Google’s DNS servers but as you can see I’ve also added OpenDNS as a comment so I can try it later if I want to.

3. Install Squid and get it working as a transparent proxy using IPTables

This bit took a while to get right but, as with most things it seems to me, in the end the actual configuration is fairly straightforward.

Install Squid: sudo apt-get install squid.

Edit the Squid configuration file /etc/squid3/squid.conf… By default this file contains a lot of settings. I made a backup and then reduced it to just those lines that needed changing so it looked like this:

http_port 3128 transparent

acl localnet src 192.168.1.0/24
acl localhost src 127.0.0.1/255.255.255.255
acl CONNECT method CONNECT

http_access allow localnet
http_access allow localhost
always_direct allow all

cache_dir aufs /var/spool/squid3 50000 16 256

Probably the most interesting part in the above is the word “transparent” after the proxy port. Essentially this means we do not have to configure every browser on our network: http://en.wikipedia.org/wiki/Proxy_server#Transparent_proxy. The final line of the file is just some instructions to configure where the cache is stored and how big it is. Again, there are tons of options available which the reader will need to find out for themselves…

To actually cause all the traffic on our LAN to go through the proxy rather than just passing through the bridge transparently requires a bit of configuration on the server using ebtables to allow easier configuration of the Linux kernel’s bridge & iptables to redirect particular TCP/IP ports to the proxy.

First I installed ebtables: sudo apt-get install ebtables

My very simplistic understanding of the following command is that it essentially tells the bridge to identify IP traffic for port 80 (http) and pass this up to the kernel’s IP stack for further processing (routing) which we then use iptables to handle.

sudo ebtables -t broute -A BROUTING -p IPv4 --ip-protocol 6 --ip-destination-port 80 -j redirect --redirect-target ACCEPT

Then we tell iptables to forward all port 80 traffic from the bridge to our proxy:

sudo iptables -t nat -A PREROUTING -i br0 -p tcp --dport 80 -j REDIRECT --to-port 3128

Restart Squid: sudo service squid3 restart

At this point http browser traffic should now be passing through your bridge and squid proxy before going on to the router and Internet. You can test to see if it is working by tailing the squid access.log file.

I found that squid seemed to be very slow at this juncture. So I resorted to some google fu and looked for some help on tuning the performance of the system. I came across this post and decided to try the configuration suggestions by adding the following lines to my squid.conf file:

#Performance Tuning Options
hosts_file /etc/hosts
dns_nameservers 8.8.8.8 8.8.4.4
cache_replacement_policy heap LFUDA
cache_swap_low 90
cache_swap_high 95
cache_mem 200MB
logfile_rotate 10
memory_pools off
maximum_object_size 50 MB
maximum_object_size_in_memory 50 KB
quick_abort_min 0 KB
quick_abort_max 0 KB
log_icp_queries off
client_db off
buffered_logs on
half_closed_clients off
log_fqdn off

This made an immediate and noticeable difference to the performance; enough so in fact that I haven’t yet bothered to go any further with tuning investigations. Thanks to the author Tony at last.fm for the suggestions.

4. Install Dansguardian and get it filtering content

sudo apt-get install dansguardian is all you need to install the application.

To get it to work with our proxy I needed to make a couple of changes to the configuration file /etc/dansguardian/dansguardian.conf.

First, remove or comment out the line at the top that reads UNCONFIGURED - Please remove this line after configuration I just prefixed it with a #.

Next we need to configure the ports by changing two lines so they look like this:

filterport = 8080
proxyport = 3128

Finally, and I think this is right, we need to set it so that Dansguardian and squid are both running as the same user so edit these two lines:

daemonuser = ‘proxy’
daemongroup = ‘proxy’

As you will see in that file, there are loads of other configuration options for Dansguardian and I will leave it up to the reader to investigate these at their leisure.

One suggestion I came across on my wanderings around the Interwebs was to grab a copy of one of the large collections of blacklisted sites records and install these into /etc/dansguardian/blacklists/. I used the one linked to from the Dansguardian website here http://urlblacklist.com/ which says it is OK to download once for free. As I understand it, having a list of blacklist sites will reduce the need for Dansguardian to parse every url or all content but this shouldn’t be relied on as the only mechanism as obviously the blacklist will get out-of-date pretty quickly.

Dansguardian has configurable lists of “phrases” and “weights” that you can tailor to suit your needs.

Now that’s installed we need to go back and reconfigure one of the iptables rules so that traffic is routed to Dansguardian rather than straight to Squid first and also enable communication between Squid and Dansguardian. You can flush (empty) the existing iptables rules by running iptables -F.

Now re-enter the rules as follows:

sudo iptables -t nat -A PREROUTING -i br0 -p tcp –dport 80 -j REDIRECT –to-port 8080
sudo iptables -t nat -A OUTPUT -p tcp –dport 80 -m owner –uid-owner proxy -j ACCEPT
sudo iptables -t nat -A OUTPUT -p tcp –dport 3128 -m owner –uid-owner proxy -j ACCEPT
sudo iptables -t nat -A OUTPUT -p tcp –dport 3128 -j REDIRECT –to-ports 8080

Restart Squid and Dansguardian: sudo service squid3 restart & sudo service dansguardian restart.

Now if you try to connect to the internet from behind the server your requests should be passed through Dansguardian and Squid automatically. If you try and visit something that is inappropriate your request should be blocked.

If it all seems to be working OK then I suggest making your ebtables and iptables rules permanent so they are restored after a reboot.

This can be achieved easily for iptables by simply running sudo iptables-save.

I followed these very helpful instructions to achieve a similar thing for the ebtables rule.

And that’s it. Try rebooting the server to make sure that it all still works without you having to re-configure everything. Then ask your kids and wife to let you know if things that they want to get to are being blocked. YOU now have the ability to control this – not your ISP… 😀

Footnotes

Be aware that on the network diagrams above the Wifi service provided by the BT Homehub router, and the LAN on the router side of the server, are not protected by these instructions. For me this is fine as the coverage of that Wifi network only makes it as far as the Kitchen anyway. And if it was more visible I could always change the key and only let my wife and I have access.

Also, I should make it clear that I know what I have above is not foolproof. I am completely aware that filtering/monitoring encrypted traffic is virtually impossible and there are plenty of services available that provide ways to circumvent what I have here. But I am also not naive and I reckon that if my kids have understood enough about networking and protocols etc. to be able to use tunnelling proxies or VPN services then they are probably mature enough to decide for themselves what they want to look at.

Of course there are plenty of additional mechanisms one can put in place if desired.

  • Time-based filters preventing any Internet access at all at certain times
  • Confiscation of Internet connected devices at bedtime
  • Placing computers and gaming consoles in public rooms of the house and not in bedrooms
  • And many more I’m sure you can think of yourself

As I see it, the point is simply this: As a parent, this is your responsibility…

Tags: , , , , , , , , , , ,

12 Comments

  • […] How to install a Squid & Dansguardian content filter on Ubuntu Server […]

  • Mohideen says:

    There are few things that you may want to change in the instructions… Thank you for the understanding..

    1. route the traffic destined for dport 443 (https) to dans as well.
    2. iptables -F would not flush the NAT table it will only flush the FILTER (default) table. You may want to do iptables -t nat -F.

  • Chris B says:

    Hi, Im not one for replying to articles. Probaly one of my firsts.
    I have been playing around with a few proxies and firewalls for the same reason as yourself. So far ive had pfSense working fine but its limited. I also want to set up a NAS / backup systems for the family and the never ending growth in data..

    The network i had in mind is almost identical to yours except I would like to use the Homehubs wifi as its pretty new and got the latest ac signal. The only way i can think of doing this is by buying a ADSL modem and putting the ubuntu server inbetween that and the bt wifi ?.

    Do you have any ideas.? ive added my email above if you have any thoughts.

    Great article and very well said about ISP’s and goverment filtering ??

    RE: Monitoring children.
    I dont want to block my kids if possible, i dont even want to have to monitor them. Mainly this is for the proxy and to find out what is slowing or using all the broadband up ? however I will be setting a few alerts up for certain sites and then if it becomes a problem consider blocking or simply speaking to them.

    Chris

  • dragonbite says:

    Thanks for this! I have used Dans Guardian with IPCop in the past but have been unsuccessful lately (plus I want to learn how it works). One of my kids just reminded me how MUCH I need to set up this content filter (& firewall).

  • mike says:

    Hi just followed most of these instructions above.
    Agree the iptables flush command needs to include nat.
    Strangely ebtables instruction stops it working and care when cut pasting iptables instructions. Sometimes the double dash is missing. Had some issues not including the -m TCP option. O herwise its 95% there. Cheers. Filtering well.
    Only downside is client IP addresses don’t show in squid log so sarg reports are bit useless. Thanks for the pointers though.

  • Kurt says:

    I followed the instructions through #3 and all worked fine. However, #4 failed. The squid cache.log file gave the following errors (for example):

    2014/12/26 21:15:54| ERROR: No forward-proxy ports configured.
    2014/12/26 21:15:55| WARNING: Forwarding loop detected for:
    GET /Artwork/SN.png HTTP/1.1
    Host: http://www.squid-cache.org
    User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:34.0) Gecko/20100101 Firefox/34.0
    Accept: image/png,image/*;q=0.8,*/*;q=0.5
    Accept-Language: en-US,en;q=0.5
    Accept-Encoding: identity,gzip,deflate
    Referer: http://nodejs.org/
    Via: 1.0 shuttle (squid/3.3.8)
    X-Forwarded-For: 127.0.0.1
    Cache-Control: max-age=259200
    Connection: keep-alive

    I finally got a clear explanation of the problem here: http://www.mail-archive.com/squid-users%40squid-cache.org/msg94787.html

    Amos Jeffries explains that DG is acting as the transparent proxy so squid should *NOT* be configured as “intercept” (which replaces the older “transparent” modifier) when used with DG. So I changed

    http_port 3128 transparent

    back to

    http_port 3128

    and it started working.

  • retcchie says:

    hi can i ask something? is the bt router in the diagram is the modem from isp?

  • retcchie says:

    do i have to use to nic? one from the WAN side and the other one is the LAN (private lan)? i need your help

    • Alan Lord says:

      No, you just need to configure both bridge ports on the same physical eth I guess. Not tried it so have fun 😉

      • retcchie says:

        sir i am new to this stuff what i am planning for is to configure this in the company whre i work for. what i am asking now is. do i have to use two NIC? one (eth0) is connected from BT router and the other (eth1) is connected to the switch? the IP address i should put in the NIC (eth0) which is connected to BT Router would comes from BT Router subnet sir? how about the NIC eth1 which is connected going to switch? what ip should i put? or this is just a passage or just used for the DHCP of the proxy server?. sorry sir im a newbee to this stuff.thanks really appreciate if you could help me.

Leave a Reply

XHTML: You can use these tags:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>